The "95 Series" refers to the cross-sectional width of the window frame profile being 95 millimeters.In aluminum alloy window systems, the series number typically corresponds to the physical width of the profile, which is a fundamental parameter affecting the overall structural stability of the window.
Core Parameters and Structure
The main structure of this window uses 6060/6063-T5 aluminum alloy profiles, with a common wall thickness of 1.8 millimeters. This specification provides a basic guarantee for wind pressure resistance and water tightness performance.The glass section uses a "5+24A+5" insulated configuration, meaning it consists of two 5-millimeter glass panes with a 24-millimeter air insulation layer in between.
| Parameters | Specifications | Decision Reference |
| Window frame width | 95mm | Basic structural dimensions of the window |
| Main material | 6060/6063-T5 aluminum alloy | Common aluminum alloy grades for doors and windows |
| Profile wall thickness | 1.8mm (common value) | Foundation of structural strength and wind pressure resistance |
| Glass configuration | 5mm glass + 24mm air gap + 5mm glass | Basic thermal insulation and lighting performance |
How a single-opening window works
"Single-opening" means this is a casement window with only one operable sash.Its working principle is: one side of the window sash is fixed to the window frame via hinges, while the other side is equipped with a handle and locking points.When the handle is operated, the locking mechanism drives the latch to engage or disengage with the strike plate on the window frame, thereby locking or unlocking the sash.
After unlocking, the window sash can be pushed open outward or inward around the hinge axis to achieve ventilation.This opening method has a relatively simple structure and can form a continuous sealing ring after closing, so it usually performs well in terms of air tightness and water tightness.
For contractors or purchasers currently selecting products for a project, understanding the core capabilities of a product means clearly knowing 'what type of problem it can stably solve' and 'under what conditions it needs to be re-evaluated'.As a standardized window type, the value of the 95 Series single-opening aluminum alloy window lies in providing a clear and executable starting point for well-defined requirements.
Based on parameters, the basic needs it can stably meet
The core capability of this series of windows is directly reflected in its nominal parameters: 1.8mm wall thickness 6060-T5 aluminum alloy profiles, combined with a 5+24A+5 insulated glass configuration.This combination is mainly designed to meetbasic thermal and structural requirements under normal climatic conditions.and designed.
- Basic Insulation and Heat InsulationThe "5+24A+5" insulated glass configuration forms an effective air insulation cavity, helping to reduce the overall thermal conductivity coefficient of the window.For conventional buildings such as residential homes and office buildings in temperate and subtropical regions, this typically meets basic energy efficiency and comfort requirements.
- Structural StabilityThe 1.8mm profile wall thickness provides reliable mechanical support for common-sized sashes (e.g., 1000mm x 1000mm), capable of withstanding normal wind pressure and stresses from daily use.This forms the foundation for safe use.
It should be clearly stated that this configuration belongs to theAn efficient and cost-effective universal solution。If your project is located in an extremely cold region (which may require triple-glazed units or Low-E coated glass), is adjacent to a major traffic artery (with very high requirements for sound insulation decibel values), or is in a high-altitude area prone to strong typhoons, then the basic parameters of the 95 Series may not be the optimal solution.In such cases, the capability it provides serves as a reliable baseline. Whether an upgrade is necessary depends on the specific environmental parameters and performance indicators of your project.
Decision Value: How to Integrate into Your Procurement and Execution Process
Choosing the 95 Series, its decision value lies not only in the window itself but also in how it integrates into your business processes.
- Solution Certainty, Reduced Communication CostsAs a standardized product with clearly defined parameters, its profiles, glass, and opening methods are all confirmed information.This provides a clear starting point for quotation, ordering, and production, significantly reducing the back-and-forth communication costs during the project's early stages for specification confirmation. It is particularly beneficial for engineering projects that prioritize efficiency and have clear requirements.
- Procurement flexibility, supporting verification and volume scalingThe product supports sample confirmation and bulk order models.You can first conduct small-batch verification to confirm quality and installation compatibility before proceeding with large-scale procurement, effectively controlling trial-and-error risks.This model is widely applicable to residential project integration, dealer inventory stocking, and brand OEM projects.
- Customization starting point, clear adjustment boundariesThis series supports adjustments to profile wall thickness or glass configuration within a specific range.This means the 95 Series is not a closed 'dead standard', but a communicable and adjustable configuration platform.The key to decision-making lies in finding a balance between the economy of the standard solution and the necessity of customization requirements.
How to determine if it's suitable for your next step?
- Suitable scenarios: Project requirements are clear (e.g., standard residential delivery, standard commercial buildings), budget needs to be controlled, and certainty of the solution is pursued, with procurement processes requiring rapid advancement.
- Scenarios requiring further confirmation: The project has specific sound insulation score requirements, thermal calculation indicators for extreme climate zones, or non-standard size and shape needs.In this case, it is recommended to use the 95 Series as the base solution and directly consult us on the feasibility and cost changes for these specific requirements.
The 95 Series single-opening aluminum alloy window is mainly suitable for those who prioritizestandardized production, cost-effectiveness, and stable supply.Business scenarios with clear requirements.Its 95mm window frame cross-section combined with the common 1.8mm wall thickness profile forms a balance point between performance and cost.
Scenario One: Batch Configuration for Residential Projects
Forresidential projects, this product is particularly suitable for standardized apartments, resettlement housing, or affordable housing projects that require batch delivery.Its standardized production process helps meet developers' comprehensive requirements for project schedule, cost control, and basic performance (such as lighting, ventilation, and insulation).The 95mm window frame width provides corresponding structural stability and is one of the common choices for such projects.
Scenario 2: Collaboration with Distributors in Engineering Projects
Inengineering project procurement, the advantage of the 95 Series lies in its status as part of a mature product line, which can support stable bulk order delivery.Clear technical parameters (such as 1.8mm profile thickness) and a mature production model facilitate technical coordination with general contractors or purchasers.
ForFor building material distributors, the 95 Series can serve as one of the entry-level or flagship product lines to meet downstream customers' demand for standard windows.At the same time, its feature of supporting a certain degree of customization provides a starting point for addressing customers' differentiated needs.
This chapter aims to help you directly determine whether the 95 Series single-opening aluminum alloy window matches your project, and to clarify the selection boundaries to avoid potential risks.
When to prioritize the 95 Series
If your project requirements are clear and you seek a balance between efficiency and cost-effectiveness, then the 95 Series is a priority option to consider. Specifically applicable to:
- Routine projects with clear objectives: For example, batch residential deliveries or standardized commercial projects that have clear requirements for basic window performance such as thermal insulation and soundproofing, and wish to shorten the sample confirmation and bulk procurement cycle.
- Requiring standard parameter configurations: The project design drawings have clearly specified the use of a 95mm wide window frame, 1.8mm wall thickness profiles, and a "5+24A+5" insulated glass combination to meet calculation requirements for wind resistance, thermal insulation, etc.
- A reliable starting point for distribution or OEM cooperationBuilding material distributors or brand owners seeking a market-proven, stable-quality product line that can be slightly adjusted to integrate into the supply chain or meet common downstream customer needs.
Situations requiring careful evaluation or consideration of alternatives
In the following situations, you need to evaluate more carefully or consider comparing with other system window solutions:
- Project requirements are not yet stableIf the project's technical specifications, budget, or overall plan are still changing frequently, locking in a specific product series too early may increase the cost of subsequent modifications.It is recommended to first complete the framework of requirements.
- Stringent performance requirements: The project is located in an extreme climate zone, or has exceptionally stringent requirements far exceeding the norm for sound insulation (e.g., near streets, airports), water tightness (e.g., high-rise buildings), and thermal insulation (e.g., passive house standards).In this case, you should evaluate whether the highest configuration of the 95 Series meets the requirements and compare its performance data with professional system window solutions.
- Key Parameters Unclear: If you are unsure about key parameters such as the profile wall thickness, glass type, and hardware configuration required for the project, direct selection carries risks.Technical consultation should be prioritized to clarify the requirements.
| Project Situation | Recommended Action |
| Clear requirements, clear budget, pursuing efficiency | ✅ Priority: Use as the baseline for quotation comparison. |
| Specific performance indicators (e.g., K-value, decibel level) are available. | ⚠️ Confirmation needed: Provide the indicators to us to verify compliance with the highest configuration of the 95 Series. |
| Located in extreme climate or high-noise environments. | ⚠️ Confirmation needed: It is recommended to simultaneously consult the higher-tier system window product line. |
| Plans and budgets change frequently. | 🛑 Recommendation to postpone: First stabilize the requirement framework, then finalize the specific product. |
Next StepsTo ensure an accurate solution match, we recommend you prepare basic project information (location, scale), performance requirements (if any), and relevant design materials before consultation.This will help us efficiently assess the suitability of the 95 Series and provide you with targeted recommendations or alternative solutions.
Frequently Asked Questions
What is the difference between the single-opening window and the sliding window in the 95 Series? How to choose?
The single-opening window (casement window) typically offers better sealing performance when closed, which is beneficial for air tightness, water tightness, thermal insulation, and soundproofing, but it occupies indoor or outdoor space when open.The sliding window does not occupy space when opened, but its sealing performance is generally weaker than that of the casement window.The choice depends on your project's core requirements: if you prioritize better sealing, energy efficiency, and security, the single-opening window is the preferred option;If the opening space is limited or a convenient opening and closing method is desired, sliding windows are more suitable.The 95 Series focuses on single-opening casement windows, suitable for scenarios requiring high sealing performance.
Can the 95 Series be made into tilt-and-turn windows?
Yes. The Qinhan System Windows and Doors 95 Series supports customization of various opening methods, including outward-opening, inward-opening, and tilt-and-turn. Tilt-and-turn windows combine the safety of inward opening with the rain-proof feature during ventilation, making them a common and popular choice. Specific configurations and prices need to be confirmed with us based on your requirements.
Is a wall thickness of 1.8mm sufficient? Will it not be sturdy?
A 1.8mm profile wall thickness is a common specification for the 95 Series. It exceeds the national standard requirements for many basic doors and windows, providing reliable structural support for standard-sized window sashes and meeting the safety needs of most conventional residential and commercial projects.The final structural safety depends not only on the wall thickness but also closely on the profile's chamber design, the quality of the hardware fittings, and the installation craftsmanship.For typhoon-prone areas or oversized window sashes, we might recommend using profiles with a higher wall thickness or a different structural design.
Can the glass be changed to Low-E or triple-pane glass?
可以。The 95 Series, as a configuration platform, supports adjusting the glass combination according to project requirements. For example, upgrading from standard insulated glass to Low-E coated insulated glass to enhance thermal insulation performance, or, if the profile allows, switching to triple-pane glass (triple glazing with two cavities).Different glass configurations will affect performance parameters and cost. You will need to provide specific performance requirements (such as the heat transfer coefficient K-value) so that we can calculate a suitable solution and provide a quotation for you.
Do you support small-batch customization for engineering projects and sample confirmation?
We support sample confirmation and bulk orders.For engineering projects, we recommend confirming details such as profile color, texture, hardware feel, and installation nodes through samples before mass production.Specific minimum order quantities, delivery cycles, and customization ranges need to be confirmed based on your order specifications and production schedule.
Learn More
Every project has its unique environment and requirements.Please send us your project location, performance requirements (such as insulation, soundproofing), opening dimensions, or design drawings. Our technical consultants will assess the suitability of the 95 Series for you and provide a detailed selection plan and quotation.
Related Products:95 Series single-opening aluminum alloy window